AK-C211008 Radio Receiver 4CH Controller for Tail Lift 2 Remote Controls
€45.41
VAT included
delivery in Poland 1-2 dni InPost
Professional 4-channel radio controller for automation, tail lifts and hydraulic platforms
AK-C211008 radio receiver is a professional four-channel wireless controller designed for remote control of devices powered by 12–36 V DC.
Thanks to four independent relays, a wide supply voltage range and an external long-range antenna, it is suitable for both industrial and automotive applications.
Main features
- Long operating range thanks to an external 433 MHz antenna with SMA connector and a sensitive radio receiver.
- 4 independent control channels allowing operation of multiple functions or devices.
- 2 radio remote controls 433 MHz included.
- Batteries for the remote controls included.
- 6 operating modes: momentary, toggle, interlock and 2-channel configurations.
- Wide supply voltage range: 12–36 V DC.
- Compatible with 12 V, 24 V and 36 V installations.
- 4 Songle SRD-09VDC-SL-C relays with load capacity up to 10 A.
- Potential-free NO, COM and NC outputs for each channel.
- Fuse protecting the circuit against the effects of short circuits and overloads.
- DC/DC switching power supply providing stable operation and low heat generation.
- Very low standby current consumption – below 6 mA.
- Receiver sensitivity down to -105 dBm.
- Remote control programming with a single LEARN button.
- Quick deletion of all stored remote controls from memory.
- Durable ABS housing with mounting brackets.
- Compact dimensions: 95 × 62 × 28 mm.
- Wide operating temperature range from -40°C to +80°C.
- Housing protection rating IP20.
- Weight: module with antenna and housing 99.5g, 2x remote controls 57g.
Technical specifications
| Model | AK-C211008 |
| Number of channels | 4 |
| Supply voltage | 12–36 V DC |
| Radio frequency | 433 MHz |
| Operating modes | 6 |
| Output type | NO, COM, NC – potential-free |
| Relays | 4 × Songle SRD-09VDC-SL-C, up to 10 A |
| Standby current | Below 6 mA |
| Receiver sensitivity | Down to -105 dBm |
| Antenna | External 433 MHz antenna with SMA connector |
| Operating temperature | -40°C to +80°C |
| Protection rating | IP20 |
| Dimensions | 95 × 62 × 28 mm |
| Weight | Module with antenna and housing 99.5g, 2x remote controls 57g |
Estimated radio communication range
| Open area | Approx. 150–300 m with clear line of sight |
| Industrial areas, yards and car parks | Approx. 80–150 m |
| Inside halls, buildings or vehicles | Approx. 30–80 m |
Actual range depends on antenna position, terrain, obstacles, radio interference and signal propagation conditions.
Industrial-grade design
Unlike many basic controllers available on the market, the AK-C211008 model is equipped with high-quality components designed to provide stable and reliable operation.
Typical applications
- Tail lifts for vans and trucks.
- Hydraulic platforms.
- Tipper systems.
- Electric actuators.
- Solenoid valve control systems.
- Winches and hoists.
- Construction machinery.
- Agricultural machinery.
- Industrial equipment.
- Gates, barriers and other automation systems.
Package contents
- AK-C211008 receiver module with housing.
- 2 radio remote controls with batteries.
- External antenna.
- Printed user manual and an extended PDF manual in Polish sent automatically after purchase.
Professional installation, configuration and commissioning
We also offer professional installation, configuration and commissioning of radio controllers for tail lifts and hydraulic platforms.
The service includes:
- Selection of a suitable controller.
- Installation work.
- Configuration of the receiver and remote controls.
- Testing of all functions.
- Verification of correct operation of the entire system.
Installation is carried out in Mińsk Mazowiecki, Poland.
We provide professional technical advice and assistance in selecting the appropriate solution for a specific tail lift or platform model.
Supply voltage test
At the request of customers, we tested the module at the declared maximum supply voltage of 36 V DC and then gradually increased the voltage until the device was damaged. At 36 V DC the module operated stably. A short circuit and failure occurred at approximately 70 V DC.
The results confirm stable operation of the module at 36 V DC under the test conditions, indicating a margin in relation to the nominal 24 V systems commonly used in trucks. The test procedure is shown on the graph.
The results confirm stable operation of the module at 36 V DC under the test conditions, indicating a margin in relation to the nominal 24 V systems commonly used in trucks. The test procedure is shown on the graph.
Important:
The radio receiver is a control system component and does not replace the original safety systems of a tail lift or hydraulic platform. Installation must be carried out in accordance with the technical documentation of the equipment manufacturer and applicable regulations, while retaining all original safeguards and safety functions. The controller should only be installed by persons with appropriate qualifications or experience in electrical installations and automation.
The radio receiver is a control system component and does not replace the original safety systems of a tail lift or hydraulic platform. Installation must be carried out in accordance with the technical documentation of the equipment manufacturer and applicable regulations, while retaining all original safeguards and safety functions. The controller should only be installed by persons with appropriate qualifications or experience in electrical installations and automation.
K1390/AK(ID400191978)
6 Items
5905042152029
Safety Information – GPSR
| Product | AK-C211008 Radio Receiver 4CH Controller for Tail Lift 2 Remote Controls |
| Model | AK-C211008 |
| Supply voltage | 12–36 V DC |
| Radio frequency | 433 MHz |
| Number of channels | 4 |
| Outputs | NO, COM, NC – potential-free |
| Relays | 4 × Songle SRD-09VDC-SL-C, up to 10 A |
| Operating temperature | -40°C to +80°C |
| Protection rating | IP20 |
⚠ WARNING
The radio receiver is a control system component and must not replace original safety systems, emergency stop devices, interlocks or other protective devices of a machine, tail lift or hydraulic platform.
The radio receiver is a control system component and must not replace original safety systems, emergency stop devices, interlocks or other protective devices of a machine, tail lift or hydraulic platform.
Safe use
| ✓ | Use only with 12–36 V DC power systems. |
| ✓ | Do not exceed the maximum supply voltage of 36 V DC. |
| ✓ | Before connection, check supply polarity, output wiring and the parameters of the controlled equipment. |
| ✓ | Do not exceed the permitted load of the relays and take the characteristics of the connected load into account. |
| ✓ | Do not use the unit if the housing, wiring, connectors, antenna or other components are damaged or show signs of overheating. |
| ✓ | Disconnect the power supply before installation, removal or modification of the wiring. |
| ✓ | After installation, test all functions while maintaining a safe distance from moving parts of the controlled equipment. |
Safety of machines and hydraulic equipment
⚠ Important:
In applications such as tail lifts, hydraulic platforms, tipper systems, winches and other moving equipment, unintended activation may cause personal injury or property damage. The controller must be integrated in a way that preserves all existing safety devices and safety functions of the equipment.
In applications such as tail lifts, hydraulic platforms, tipper systems, winches and other moving equipment, unintended activation may cause personal injury or property damage. The controller must be integrated in a way that preserves all existing safety devices and safety functions of the equipment.
| ✓ | Do not remove or bypass original interlocks, limit switches, sensors or emergency stop devices. |
| ✓ | Before activation, make sure that no person or obstacle is present in the operating area. |
| ✓ | Remote control functions should be assigned clearly to reduce the risk of accidental activation of the wrong function or direction. |
| ✓ | After any change to receiver or remote control configuration, retest all channels and safety functions. |
Radio control
Radio communication may be affected by obstacles, other radio equipment, metal structures and environmental conditions. Do not assume that a radio command will always be received immediately or from the maximum stated range.
Electrical installation
| Power supply | 12–36 V DC |
| Relay outputs | Potential-free NO, COM and NC contacts |
| Protection | Fuse in the circuit |
| Before commissioning | Check polarity, wiring, fuse condition, channel configuration and ensure there are no short circuits. |
Supply voltage
⚠ Do not exceed 36 V DC.
Operation above the declared 12–36 V DC supply range may cause permanent damage, short circuit, overheating or other hazardous effects. A destructive overvoltage test does not define a permissible operating range.
Operation above the declared 12–36 V DC supply range may cause permanent damage, short circuit, overheating or other hazardous effects. A destructive overvoltage test does not define a permissible operating range.
Environmental conditions
| Operating temperature | -40°C to +80°C |
| Protection rating | IP20 |
Due to the IP20 protection rating, the module must not be exposed without additional protection to water, rain, condensation, conductive dust or other conditions that may cause short circuits or corrosion. The installation location should provide suitable protection.
Remote controls and batteries
The remote controls contain batteries. Do not short-circuit, disassemble, heat or burn the batteries. Replace used or damaged batteries with suitable replacements and dispose of used batteries in accordance with applicable battery disposal rules.
Storage
Store in a dry and clean place. Protect against moisture, corrosion, contamination, high temperature, strong impacts and mechanical damage to the housing, antenna, wiring and connectors.
Important information
The product is a control system component intended for integration into a properly designed electrical installation and automation system.
Installation must be carried out in accordance with the technical documentation of the controlled equipment while preserving its original safeguards and safety functions.
For tail lifts, hydraulic platforms, machines, winches and other equipment involving hazardous movement, installation and commissioning should be performed by persons with suitable qualifications or experience in electrical installations and automation.
Use only as intended, within the 12–36 V DC supply range and with all required safety systems of the controlled equipment retained.
| Manufacturer (Private Label) (EU) 2023/988 (GPSR) | |
|---|---|
| Name: | Superelektronika sp. z o.o. |
| Address: | ul. gen. K. Sosnkowskiego 26/83 05-300 Mińsk Mazowiecki, Poland |
| E-mail: | sklep@superelektronika.pl |
| Responsible Person (EU) 2023/988 (GPSR) | |
| Name: | Superelektronika sp. z o.o. |
| Address: | ul. gen. K. Sosnkowskiego 26/83 05-300 Mińsk Mazowiecki, Poland |
| E-mail: | sklep@superelektronika.pl |
You might also like
Comments (0)
No customer reviews for the moment.