Precision multi-turn potentiometer 3590S 100K 2W W104 screw-on BOURNS

3590S potentiometer

• Manufactured byBOURNS®
• Model 3590S W104
• Resistance range 100 kOhm (1 Ohm 0.1% – 10,000 Ohm)
• Power rating: 2 watts
• Number of pins: 3
• Number of turns: 10 (3600° +10°, -0°)
• Dielectric strength (MIL-STD-202, Method 301): 1,500 VAC
• Revolutions per minute (operating) 200 max.
• Operating temperature range: -40 °C to +125 °C
• Vibration resistance 15g
• Shock resistance 50g
• Lifetime under 2W load 1,000 hours
• Change in total resistance: ±2% max.
• Rotational life (unloaded): 1,000,000 shaft revolutions
• Moisture resistance (MIL-STD-202, Method 103, Condition B)
• IP protection class
  Sealed versions (-3, -4, -7, and -8) IP 65
  Non-sealed versions (-1, -2, -5, and -6) IP 40
• Torque: Initial and operating 0.85 N-cm (1.2 oz.-in.) maximum (unsealed) 1.41 N-cm (2.0 oz.-in.) maximum (sealed)
• Installation torque: 55–80 N·cm (5–7 lb·in) (plastic); 90–113 N·cm (8–10 in·lb) (metal)
• Shaft runout 0.13 mm (0.005 in.) T.I.R.
• Lateral runout 0.20 mm (0.008 in.) T.I.R.
• Shaft axial play 0.25 mm (0.010 in.) T.I.R.
• Radial shaft clearance 0.13 mm (0.005 in.) T.I.R.
• Guide diameter runout: 0.08 mm (0.003 in.) T.I.R.
• Backlash 1.0° maximum
• Weight: Approximately 18.4 grams
• Soldering conditions
  Hand soldering: 96.5Sn/3.0Ag/0.5Cu solid wire or rosin-core wire without cleaning; 370 °C (700 °F) max. for 3 seconds
  Wave soldering: 96.5Sn/3.0Ag/0.5Cu solder with flux, no cleaning required; 260 °C (500 °F) max. for 5 seconds
• Cleaning processes Not recommended
• Exact dimensions as per the specification and technical drawing
• Overall height 39.5 mm
• Overall width 22.8 mm
• Thread length approx. 5 mm
• Total mounting length of the pin approx. 19 mm
• Minimum mounting diameter: 9.3 mm
• Rear section length: 18.4 mm